The standard Interface Cable A (1083-01) is 54" (137cm) long.
It uses 34-wire flat cable with card edge connectors at each
end. Pin 1 is indicated by a contrasting wire color along the
appropriate edge. This cable is used to connect the controller
directly to any single storage module (which can in turn contain
one or two disk drives. When two or more storage modules are to
be connected to the controller, the appropriate Daisy Chain cable
must be used in place of the standard Cable A.
We use a cookie to enable basic features of our website.
By clicking on "accept", and by your continued use of this website, you agree to our practice of using and storing an essential cookie in your browser.